Otterbein NHL 2 is a natural hydraulic lime that delivers the perfect balance of strength and breathability.

Secil 2 can be used for internal plastering. Can be used with fine sand for skim coat.

Secil NHL 3,5 is ideally suited for bedding, rendering and pointing.

Secil NHL 5 is normally used for flooring such as limecrete floors or in highly exposed locations such as chimney flaunching etc.

Used mainly for masonry and external plaster works. The most popular material for new build work.

Used mainly for masonry and external plaster works. The most popular material for new build work.

[Consolidation Mortar] Cal CS is a lime based preparation mortar before the application of a new coating.

[RJ 35] A general purpose breathable lime mortar for building or pointing stone, brick and block. Ideal for conservation, restoration and newbuild.

Cal RB is specially designed for the maintenance and rehabilitation of buildings, being suitable for the levelling of old masonry or new construction.

Cal AC is a lime based finishing plaster generally used externally.

Cal AC Fino is a fine finishing lime plaster with smooth finish

[ISOVIT E-CORK] is formulated from mixed binders, cork aggregates and Natural Hydraulic Lime. For bonding thermal insulation board.

Secil ecoCORK Lime is a lightweight render, formulated with natural cork aggregates, Natural Hydraulic Lime, lime aggregates and additions

TERMOINTONACO is a nanotechnological thermo-insulating plaster based on a natural air-lime binder and lightened amorphous micro silica with high thermo-insulating and reflectance characteristics (the ability to reflect the heat back into the living area instead of letting it escape), with excellent thermal mass, acoustic soundproofing and fire resistance.

The TermoRasante Aerogel is a super-insulating thermal plaster, a thermal bridging regulator, anti-condensation, anti-mould, highly breathable lime-aerogel thermal plaster. Due to its high aerogel content offers great insulation performance in a thin form factor, saving valuable space.

The RasoThermo Aerogel is a super-insulating, high performance lime-based thermal plaster, made from lime, aerogel and natural volcanic pozzolans, with a total of 14 carefully chosen ingredients. It provides exceptional thermal insulation in a thin, breathable layer due to its combination of premium insulating materials.

Used to gauge traditional lime mortars and plasters, as well in situations that require rapid setting or exceptionally high compressive strengths

Used mainly on historic buildings, soft masonry and where exact mortar matches are important

Final skim coat for lime plaster.

High Calcium Quicklime Pebble and Powder, used for making lime putty and hot-mixed or hot-lime mortars.

Historic Decorative / Protective coat for lime plaster.

Provide extra grab for the fibrous lime plaster

Frost and Fire Protection for fresh lime mortar

100% fibreglass mesh with 160 g/m2 anti-alkaline treatment

Used to improve tensile strength and to reduce shrinkage cracking

A range of pigmented natural additives traditionally used to modify the colour of lime mortars, allowing for a bespoke coloured finish.

Churn brush, leaves a flush finish with an open texture.

Used to improve tensile strength and to reduce shrinkage cracking